Company News

Titanium grades and specifications

Although titanium was discovered, it has not been mined and used. Until 1910, American chemist Hunter used sodium to reduce titanium tetrachloride at a high temperature of 700-800℃ and obtained 99....

During the construction of titanium pipes and titanium alloy pipes, the usual operations are as follows: 1. Titanium alloy pipe elbows should be inspected on time. The processed surface must alw...

The main strengthening methods of titanium alloys are solid solution strengthening and dispersion strengthening. The former is to improve the properties of the alloy by increasing the solid solutio...

The ruthenium-iridium-titanium anode has a certain working life during the electrolysis operation. When the voltage rises very high and there is actually no current passing through, the ruthenium-i...

We all know that industrial titanium rod is a title for square titanium alloy material and rectangular titanium alloy material, that is, titanium tubes with flat sides.

1.When welding, small heat input welding should be selected within the qualified process parameters, and the temperature between layers should not be higher than 200 ℃ to prevent the crystal grains...

Among organic compounds, titanium has very good stability except for five organic acids (formic acid, acetic acid, oxalic acid, trichloroacetic acid and trifluoroacetic acid) at higher temperatures...

Titanium rod barrel burnishing is to grind the parts and abrasives in dilute acid or dilute alkali with emulsifier (or corrosion inhibitor) and follow the rotation of the drum to obtain a bright ap...

Titanium heat exchangers, condensers and related auxiliary equipment have been successfully used for more than 20 years in petrochemical enterprises. Among the titanium materials, the most commonly...

Grade 1 Grade 1 titanium is the softest grade of titanium, which makes if very formable. It offers a high ductility while still maintaining the necessary impact toughness. This grade is most often ...

Titanium alloys usually require thermal processing in the β single-phase zone or α+β two-phase zone to obtain products with certain structure and properties. The selection of thermal processing par...