News

1. According to chemical industry standards: integral flange (IF), threaded flange (Th), plate flat welding flange (PL), neck butt welding flange (WN), neck flat welding flange (SO) , Socket weldin...

Titanium has good stability in highly corrosive hot water containing chlorides and sulfides, so it has been widely used as a cooling pipe for heat exchangers in thermal power plants. After replacin...

Titanium pipelines mainly transport severely corrosive and dangerous media. When the media with corrosive media passes through the titanium pipe fittings, the media carries a certain pressure, and ...

Generally, titanium pipe manufacturers cannot have flowing air in the repair welding of titanium pipes. Other aspects are the same as repair welding in the welding box. But pay special attention to:

Titanium anode has excellent electrical conductivity and corrosion resistance, and its service life is much longer than that of lead anode. It can work stably for more than 4000 hours and has low c...

The titanium pipe fitting standard first appeared in the American Aerospace Standards. The only internationally available standard for titanium pipe fittings in the chemical industry is ASTM B363 [...

1. Introduction of Titanium In 1948, the American DuPont Company used the magnesium method to produce tons of titanium sponge-this marked the beginning of the industrial production of titanium spon...

1、 Preparation of ingot 1. After receiving the production operation plan, the production technologist should carefully review part of the plan. If there is any problem, communicate with the planner...

Ten characteristics of titanium 1、 Low density and high specific strength The density of titanium is 4.51g/cm3, which is higher than that of aluminum and lower than that of steel, copper and nickel...

In order to reduce the burden caused by the high cost of titanium application, on the one hand, the residual titanium treatment technology has been developed, on the other hand, the near net formin...

Aug.11 Ship to the Pakistan Titanium Bar 300kg 3/5.5/11/12/16*2000mm Aug.14 Ship to the USA Gr2 Titanium Bar 12.5kg 9.52*0.8*2390mm Aug.20 Ship to the Russia Titanium Anode Mesh 4 pieces 1.5x170x17...

Aug.3 Ship to the Netherlands Titanium screws M 3 *8/M4*10/M5*8/M 6 *16 mm 2930pcs Titanium nuts M4/M5/M6mm 770pcs Aug.6 Ship to Mexico Titanium anode wire Ø2.4*305mm 20 00 pcs Ø2.4*3 80 mm 830pcs ...