Titanium Clad Copper bar
The base material is >99.9% T2 copper , the layer material is industrial pure titanium gr1/gr2, the supply state is hot working state (R) or hard state (Y), and the section shape is round, square and drum.
Product Introduction
Specifications
Shape | Size Range |
Square | 24×24 – 33×33 mm |
Rectangular | 35×10 – 100×40 mm |
Round | OD 20 – 80 mm |
Flat | 30–50 × 10–15 mm |
Advantages
Excellent electrical conductivity (copper core)
Superior corrosion resistance (titanium cladding)
Long service life & low maintenance
Stable performance in harsh electrolytes
Key Benefit
Replaces pure copper bars in corrosive environments, improving efficiency and reducing downtime.
Product Description
Titanium clad copper bars are manufactured through metallurgical bonding of titanium onto a copper core. With a titanium layer thickness of 0.8–1.2 mm, the product ensures full protection under strong corrosive conditions while maintaining high conductivity.
Advanced Bonding Technology
Metallurgical Bonding
High extrusion ratio ensures strong bonding between titanium and copper.
High Strength
Interface strength ≥125 MPa, shear strength up to 250 MPa.
Reliable Integrity
Bonding rate ≥99.8%, minimal delamination risk.
Applications
Electroplating systems
Water treatment & electrolysis
Chlor-alkali industry
Metal anodes (MMO / DSA)
Conductive bus bars
High-current electrochemical systems Corrosion-critical environments
Hot Tags:
You Might Also Like
Send Inquiry
