Titanium Plate Heat Exchanger

Titanium Plate Heat Exchanger

A novel type of high-efficiency heat exchanger made of a series of corrugated metal plates is the titanium plate heat exchanger. A small, rectangular channel that is created between the various plates allows heat to flow between them. It has the potential to replace the shell and tube heat exchanger in the relevant scale due to its significantly higher heat transfer coefficient in comparison to the conventional shell and tube heat exchanger at the same flow resistance and pump power consumption.

In the heat exchanger industry, popular materials for plates include austenitic stainless steel, titanium and titanium alloys, nickel and nickel alloys, and other cold-rolled thin plates. The titanium plate and frame heat exchanger, which offers a few advantages over rounded heat exchangers and a huge upper hand on the lookout.

Our company provides titanium coil and titanium sheet. We have plenty of titanium sheets in stock. That can be cut in different sizes according to the customer's needs, greatly shorten the time of delivery.
We mainly provide pure titanium sheet of Gr1, Gr2, Gr4 grades; For titanium alloy sheet, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades.

Sheets in Ti.Grade2 ASTM B265, with the corresponding certificate.

Quantity : approx. 10 Tons. Sheet x 6 mm. preferable in 1500 mm wide.

Certificates supplied: titanium composition and tensile property test report.

HS:81089032.90 Other plates, sheets, strap, foil, of titanium of a thickness exceeding 0.8mm

Titanium plate test results

Features:

High effectiveness and energy saving: It has a heat transfer coefficient of 3000-4500 kcal/m2-°C-h, which is 35 times greater than the shell and tube heat exchanger's thermal efficiency.

Structure that is small: The plate arrangement of the heat exchanger is exact. Titanium plate and frame heat exchanger cover less region and utilize less space than different kinds of intensity exchangers. Plate heat exchangers cover a larger area than shell and tube heat exchangers do.

Easy to clean and take apart: The plate heat exchanger will be solidly clamped by the clamping bolts, making it simple to disassemble and install and clean at any time. Additionally, scale formation is difficult on the plate's clean surface.

Long lasting use: Plate heat exchangers made of pressed titanium alloy plates can withstand a variety of corrosive conditions. In the meantime, the rubber gasket can be changed as needed and is made to be easy to take apart and keep clean.

Well-adapted: The self-reliant components of a plate heat exchanger are the plates. Depending on the requirements of the process, it can be increased or decreased. It tends to be applied to the necessities of a wide range of cycles.

No stringy liquid: The titanium plate heat exchanger sealing groove includes a drain channel. Subsequently, there is no media arrangement. The medium is constantly shot out ostensibly, in any event, when a break creates.

Hot Tags: