Titanium 6Al-4V Grade 5 Bar
UNS R56400 is a corrosion resistant titanium alloy, chemical and technical requirements are the same as GR5/TC4/Ti6Al4V.
size:dia.20.8/19.8mm
length: 3000mm
qty: 7 tons
Product Introduction
Product Introduction
Titanium Grade 5 (UNS R56400), also known as Ti-6Al-4V, is the most widely used titanium alloy in modern industry.
This is a two-phase α+β titanium alloy with:
Aluminum (Al) as the α-phase stabilizer
Vanadium (V) as the β-phase stabilizer
Titanium Grade 5 is widely preferred in aerospace, medical, marine, and automotive industries due to its:
High strength
Excellent corrosion resistance
Good weldability
Favorable machinability
Density of Ti-6Al-4V: 4.43 g/cm³
Chemical Composition
| Element | Min (%) | Max (%) |
|---|---|---|
| Nitrogen | - | 0.05 |
| Carbon | - | 0.08 |
| Hydrogen | - | 0.015 |
| Iron | - | 0.40 |
| Oxygen | - | 0.20 |
| Aluminum | 5.50 | 6.75 |
| Vanadium | 3.50 | 4.50 |
| Other elements (each) | - | 0.10 |
| Total other elements | - | 0.40 |
| Titanium | Balance | Balance |
Mechanical Properties (Room Temperature)
| Property | MPa | ksi |
|---|---|---|
| 0.2% Yield Strength | 828 MPa | 120 ksi |
| Ultimate Tensile Strength | 895 MPa | 130 ksi |
| Elongation | 5% | |
| Reduction of Area | 25% |
These properties make Ti-6Al-4V suitable for high-stress structural components.
Temperature Performance
Service temperature (typical):
Up to 427°C / 800°F
Can be used in:
Annealed condition
Solution-treated and aged conditions
Applications
Titanium Grade 5 alloy is the most widely used titanium alloy in the α+β class.
Aerospace
Jet engine compressor blades
Disks and rings
Airframe structures
Space capsule components
Rocket motor casings
Helicopter rotor hubs
Medical Industry
Surgical implants
Orthopedic devices
Dental implant structures
Industrial & Consumer Products
High-strength fasteners
Sporting equipment
Critical forgings requiring high strength-to-weight ratio
Manufacturing Capabilities
Our company operates its own:
Forging workshop
Rolling processing workshop
We can directly produce:
Titanium bars
Titanium rods
Customized titanium semi-finished products
Production Standards
Titanium bars are manufactured according to international standards:
ASTM B348
ASME SB348
ASTM B265 / ASME SB265
AMS4911
AMS4928
Quality Control
Ultrasonic testing (UT) performed before shipment
Chemical composition verification
Mechanical property testing
Hot Tags: Titanium 6Al-4V Grade 5 Bar
You Might Also Like
Send Inquiry
