Titanium Explosion Cladding Plate

Titanium Explosion Cladding Plate is a composite material that consists of a layer of titanium bonded to a layer of steel or other metal. The bonding between the two layers is achieved through a process called explosive bonding or explosive welding, where high energy explosives are used to create a metallurgical bond between the layers, it also can be called titanium cladding steel plate, the production method is explosion cladding, if needs more bigger and thiner clading plate, we will hot rolled the cladding plate again.

One of the key advantages of Titanium Explosion Cladding Plate is their cost-effectiveness. Since titanium is an expensive material, using it in large quantities can be cost-prohibitive. By bonding a layer of titanium to a layer of steel, it is possible to achieve the desired properties at a lower cost.

The thickness of the titanium layer can vary depending on the application, with thicker layers offering greater corrosion resistance but at a higher cost. Overall,

There are a versatile and cost-effective option for a wide range of applications that require the combination of the properties of titanium and steel.

Titanium Explosion Cladding Steel plate for chimney project

1. APPLICATION:

For Chimney FGD project

2. CONDITION OF DELIVERY:

The clad plates shall be supplied in heat-treated condition.

3. MATERIAL OF CONSTRUCTION:

Base plate: Q235B/ A36 Steel

Cladding material: Gr.2 Titanium

4. SIZES and TOLERANCE:

Base metal thickness: 8mm+/-0.2mm

Clad metal thickness: 2mm+/-0.2mm

Length :12,000mm +10mm/0mm

Width: 2,000mm +10mm/0mm

5. Flatness of Cladded Plate:

Flatness shall be 5 mm/m and 8 mm/2m.

6. The method of bonding of cladding metal plate to base plate shall be explosion bonding and Hot Rolling

7. Freedom from Defects:

The material shall be clean, smooth, sound and free from injurious defects.

8. Test Samples:

Test Samples shall be selected and prepared as per ASTM A264. Number of tests and re-tests shall be carried out as per ASTM A264.

Titanium Explosion Cladding plate can be a cost-effective solution for many applications. Titanium is an expensive material, and using it in large quantities can significantly increase the cost of a project. However, by bonding a layer of titanium to a layer of steel, it is possible to achieve the desired properties at a lower cost. The steel layer of the composite material provides strength and durability, while the titanium layer provides superior corrosion resistance and other properties that make it well-suited for certain applications, so it is a good choice for chemical equipment manufacturing, and the environment which is corrosive.

Hot Tags: