Titanium Pipe
Grade: Gr1, Gr2, Gr7, Gr9, Gr11, Gr12, Gr16 etc
Available in size range outside diameter 9.53–38.1 mm (3/8–1½ in.)
ASTM B 338 & ASME SB 338
Product Introduction
We are manufacturer, we can provide two types of titanium pipe/tube---seamless and welded
Titanium pipes are processed by titanium ingot,Then make tubes to appropriate size with a series of processes such as multiple rolling, annealing, pickling, and grinding technology. The titanium seamless pipe shall be made from hollow billet by any cold reducing or cold drawing process that will yield a product meeting the requirements prescribed.
It is done by selecting a suitable thickness of the high-quality cold rolled titanium plate, after the process of flattening, cutting, and washing, then rolling up the titanium pipe into a tubular, welding by the whole automatic welding equipment. Our advanced welding equipment guaranteed the quality of welding. Ultimately help to produce an excellent quality. The welded tube shall be made from the flat-rolled product by an automatic arc-welding process. It shall be sufficiently cold worked to the final size in order to transform the cast weld microstructure into a typical equiaxed microstructure in the weld upon subsequent heat treatment
Specification
Seamless pipe/tube
Grade: Gr1, Gr2, Gr7, Gr9, Gr11, Gr12, Gr16 etc
Outer diameter: 3~110mm
Wall thickness: 0.1~5.5mm
Length: ≤19000mm
Welded pipe/tube
Grade: Gr1, Gr2, Gr7, Gr9, Gr11, Gr12, Gr16 etc
Outer diameter: 10~1000mm
Wall thickness: 0.5~5.5mm
Length: ≤19000mm
Titanium Welded Pipe sizes Weight is in pounds based on a density of 0.163 lbs/cubic inch. Dimensional tolerances to ASME B36.19M and ASME B36.10M – *ASME B36.19 wall thickness does not conform to ASME B36.10M.
The wall thickness listed is nominal wall thickness. Sch-10S and Sch-10 do not permit threading in accordance with ASME B1.20.1.
Size Range:Min OD: 0.375″/ 9.25 mm | Max OD: 48.000″/1300.00 mm
Quality test of seamless and welded tubes
- 100% Ultrasonic Test
100% Eddy's current test
100% Hydraulic Test
100% X-ray test (welded tube)
Mechanical properties test
Chemical composition test
Hardness test
Flattening test
Flaring
Application
It have a wide range of applications due to their unique properties, such as high strength, excellent corrosion resistance, and low density. Here are some common applications:
1. Chemical processing: titanium pipes are widely used in the chemical industry for their excellent resistance to various corrosive chemicals, including acids, alkalis, and salts. They are used in the production of chemicals such as chloralkali, sulfuric acid, and hydrochloric acid.
2. Oil and gas industry: It is used in the oil and gas industry for its high resistance to corrosion and erosion caused by high-pressure and high-temperature environments. They are used in pipelines, downhole tubing, and other critical applications.
3. Aerospace and aviation: Titanium pipes are used in aerospace and aviation applications due to their high strength-to-weight ratio and excellent resistance to corrosion. They are used in aircraft components such as engine parts, hydraulic systems, and airframes.
4. Power generation: titanium weed pipe are used in power generation applications due to their excellent resistance to corrosion and erosion caused by high-temperature and high-pressure steam environments. They are used in power plants for the production of steam, such as in heat exchangers and condensers.
Hot Tags: titanium pipe,titanium pipes,titanium weed pipe
You Might Also Like
Send Inquiry
