3mm Titanium Clad Copper Wire

Introduction

Titanium clad copper wire diameter can be 2~6.35mm, the titanium layer thickness can be custom as your need, unit coil length can be 100 meters long. The big advantage of titanium-clad copper wire is corrosion resistance and good conductivity, as it combines the titanium and copper material advantages. now it is widely used in cathodic protection field due to its resistance is much lower than pure gr1 titanium. Our company also can produce titanium-clad copper bar, it is widely used in electroplating field, which can not only ensure the original conductive performance of the copper material, but also use titanium coverage to protect the copper body that is not corroded, and greatly reduces the electroplating and the pollution of the plating fluid.

production method

The production method of titanium-clad copper wire is explosion and hot rolled, details as follows:

The explosion method firstly puts the copper rod into the titanium tube, uniformly distributes the explosive material outside the titanium tube, and uses the detonator to detonate the explosive, so that the copper rod and the titanium tube form a composite under the action of the explosive force. Since the cross-sectional size of the titanium-clad copper rod is generally small, the production yield by the explosion method is low, resulting in high cost, and no one in the industrial production currently adopts this method.

Explosion + rolling method is to produce the titanium-clad copper wire, to produce the titanium copper composite wire, we need to roll the titanium clad copper rods produced by the previous explosion production method, until the size required by the customer. After the titanium-clad copper wire is produced, we will conduct non -destructive detection to detect the quality.

Hot Tags: titanium copper composite wire, titanium cladding copper wire.