MMO Titanium Mesh Anodes

Products model: pure titanium mesh, titanium mesh electrode, titanium mesh plate anode, round hole titanium mesh

MMO titanium mesh plate anode introduction:

It is widely used in electroplating ( copper electroplating and gold electroplating in the circuit board industry), electrolysis and other hydrometallurgical activities . The preparation and application of electrodes are quite mature.
1. Substrate material: GR1, GR2, TA1, TA2 Titanium content ≥99.6%, raw material thickness: 0.1mm-2mm, the titanium mesh produced by mechanical processing, the hole shape is a diamond or round hole, the opening rate is large, the surface area is large, and the strength is high Because of the acid and alkali resistance and conductivity of the titanium mesh itself, it is often used to make battery current collector mesh, oxygen cathode ion membrane electrolyzer titanium anode, filter titanium mesh, electroplating anode mesh and so on.
2. Hole type: diamond and round
3. Thickness: 0.1mm-2mm
4. Width: 5mm-1250mm
5. Diamond hole specifications: 1*2mm, 3*6mm, 3.5*6mm, 5*10mm, 5*12mm, etc. round hole size can be done as your need.

6. Surface: can provide coating treatment processes such as coated ruthenium oxide, ruthenium and yttrium, platinum.
Anode shape: It can be cut into circular diameter 30mm-1200mm, rectangle, square, rhombus and other specifications, or it can be welded by reel to make titanium anodes of other shapes.

7. The titanium mesh electrode has a great advantage over the titanium plate anode. It greatly increases the contact area between the anode and the solution, increases the production capacity, and greatly improves the efficiency, its disadvantage is that the deposit is not as easy to clean as the titanium plate.

Ir-Ta titanium anode for show: