Titanium Clad Copper Rod for Electroplating

Titanium clad copper rod for electroplating is supported by a titanium clad copper rod, which has three functions: first, it supports the anode; Second, conducting electricity; The third is corrosion resistance. In order to meet these requirements, the corrosion resistance of titanium and the conductivity of copper are used to connect the two. The titanium copper composite ingot is subjected to strong pressure in the extrusion process. The interface between the two metals forms a metallurgical connection. The wavy interface is the best way to connect the two metals. Then the contact reliability of the titanium copper composite rod is improved. Its resistivity is low, its conductive function is good, and its corrosion resistance is good.

Titanium clad copper rod is widely used in Hydrometallurgy and electroplating industry, it combines high corrosion resistance and good conductivity. At present, the connection between titanium plate and cathode conductive copper is mainly connected by lug or fastening. Join 2 methods, as shown below:

Design key points:

1. The commonly used titanium clad copper rod and zirconium clad copper rod section dimensions are: round section diameter 25mm and 38mm. Rectangular section size: 10 * 40mm, 12 * 52mm, 12 * 100mm.

2. The conductive current of titanium clad copper rod is generally greater than 2.5A/mm ²

3. The bending part of round titanium copper composite rod is processed by bending, and the commonly used bending radius dimensions are shown in the figure below.

4. The bending part of rectangular titanium-clad copper rod is formed by welding, which can be divided into two welding methods: the first is wind welding, which is simple to operate; Second, the copper end face is machined and welded with filler materials to increase the firmness between copper and copper.

Hot Tags: Titanium copper composite bar, titanium cladding copper rod. titanium-clad copper rod