Products

Home / Products/ Materials (Titanium & Alloys) / Titanium Plate

Grade 5 titanium plate

Name: Grade 5 titanium plate
Brand: Titanium
SKU: 100142702

Composition: Ti 6Al 4V Standard: ASTM B265 Spec.: 25/30/45mm * 1000*2000mm Weight (kg/pc): 225.5/ 270.6/ 405.9kg Surface: Acid pickling surface Unit price:$31.89 HS Code: 810890 Place of orgin: Baoji City, China

Send Inquiry

Product Introduction

Grade 5 titanium plate is also called TC4, it has poor stamping properties and good thermoplasticity. Can be welded in various forms, the strength of the welded joint can reach 90% of the strength of the base metal. Machining performance is still good, it is necessary to use carbide cutting tools, large cutting speed, slow speed, sufficient cooling. Good corrosion resistance and good thermal stability. It is one of the most widely used titanium alloys to make long-term work parts below 400 ℃

The issue presented by considering titanium plate over aluminum plate is intriguing. Aluminum is significantly lighter and cheaper than titanium alloy. Titanium, on the other hand, is much stronger, necessitating significantly less material. In point of fact, the final purpose determines the application of titanium plate.

USES The motorsports industry makes extensive use of grade 5 titanium plate 2mm 300mm 300mm. It is ideal for use in 3D printing to create intricate parts and components, just like aluminum. A game-changer, especially in motorsport, is achieving ultimate strength while remaining as light as possible; Because of this, titanium has emerged as an essential alloy in the supply chain for motorsport engineering. We have titanium plate in stock in a variety of sizes that can be delivered right away.

Composition: Ti-6Al-4V

Standard: ASTM B265

Spec.: 25/30/45mm * 1000*2000mm

Weight (kg/pc): 225.5/ 270.6/ 405.9kg

Surface: Acid pickling surface

Unit price:$31.89

HS Code: 810890

Place of orgin: Baoji City, China

Applications

Titanium alloy is mainly used to make compressor parts for aircraft engines, and can be used to manufacture compressor disks and blades. Followed by the structural components of rockets, missiles and high-speed aircraft. In the 1970s, the amount of titanium alloy used in aero engines generally accounted for 20% to 30% of the total weight of the structure. It was mainly used to manufacture compressor components, such as forged titanium fans, compressor disks and blades, cast titanium compressor casings, and intermediaries. Case, bearing housing, etc. The spacecraft mainly uses the high specific strength, corrosion resistance and low temperature resistance of titanium alloys to manufacture various pressure vessels, fuel storage tanks, fasteners, instrument bands, frames and rocket shells. Artificial earth satellites, lunar modules, manned spacecraft and space shuttles also use titanium alloy plate weldments.

More Titanium Alloy Grade

TA6 has good welding performance, high creep strength, but low process plasticity, and can be deformed in the hot state. When the alloy is subjected to axial load, it is not sensitive to the notch, and the cutting performance is good for parts working below 400 ℃ And welding partsTA7 has poor stamping properties and good thermoplasticity. It can be used in various forms of welding with good performance, and the strength and plasticity of the welded joint can be equal to the base metal. Machining performance is the same as industrial pure titanium. Good corrosion resistance, good high temperature and thermal stability. For long-term work below 500 ° C, it can be used for various types of die forgings.TA8 has good thermoplasticity. It can be welded in various forms and has good weldability. Machinability is the same as industrial pure titanium. Good oxidation resistance Long-term working parts below 500 ° C. Can make engine compressor discs and bladesTC1 has good punchability. It can be welded in various forms and has good weldability. Machinability is the same as industrial pure titanium. Good oxidation resistance. Parts for work below 400 ℃. Suitable for all kinds of plates, stamping and welding parts TC2 at 350 ℃, 100h lasting strength is above 400MPa, good plasticity in hot processing. When heated to 350-400 ° C, there is no tendency to become brittle. Therefore, it can be used to weld parts that work at high temperatures. Parts that work below 500 ° C, welded parts, forged parts, and bent partsTC4 has poor stamping properties and good thermoplasticity. Can be welded in various forms, the strength of the welded joint can reach 90% of the strength of the base metal. Machining performance is still good, it is necessary to use carbide cutting tools, large cutting speed, slow speed, sufficient cooling. Good corrosion resistance and good thermal stability. It is one of the most widely used titanium alloys to make long-term work parts below 400 ℃TC5 is stable below 350, and its plasticity decreases at higher temperatures. TC9, which can be deformed in the hot state, such as forging and stamping, works below 350 ° C. Machinability is the same as TC4 alloy. High corrosion resistance. Thermal stability is still good 400 ° C long-term working parts. Can make compressor discs and bladesTC10 has poor stamping properties and good thermoplasticity. Can be welded in various forms, the strength of the welded joint can reach 90% of the strength of the base metal

Hot Tags:

Previous: 6Al-4v titanium plate

Next: Titanium Mesh Sheet