Grade 3 Titanium Wire
1. medium oxygen, high strength among the pure titanium pure grades
2. diameter: 0.1~6mm
3. type: straight or in coil
4. MOQ: in stock
Product Introduction
Grade 3 titanium wire is a type of pure titanium material, that is composed of approximately 98% titanium, with small amounts of other elements such as oxygen and iron. The production standard is ASTM B863, the surface can be polished or pickling treatment. diameter can be done from 0.1~6mm, this Gr3 titanium material can be drawn or extruded into many shapes.
It is known for its high strength, excellent corrosion resistance, and low density, making it a popular choice for various applications. such as aerospace and aviation components, medical implants, chemical processing equipment and sports equipment.
Mechanical properties
Mechanical Properties(>%) | |||||
Grade | Tensile Strength(min) | Yeild Strength(0.2% offset)) | Elongation(%) | ||
ksi | MPa | Min | |||
Ksi | Mpa | ||||
gr3 | 65 | 450 | 55 | 380 | 24 |
Introduction
The process of producing gr3 titanium wire typically involves several steps, please check follows:
1. Melting: The first step in producing titanium wire is to melt the titanium metal in a furnace. This is typically done using an arc furnace or vacuum furnace, which heats the titanium sponge to a high temperature until it melts.
2. Forming: Once the titanium sponge is melted, it is then poured into a mold to form an ingot. The ingot is typically cylindrical in shape and can be several feet long and several inches in diameter.
3. Rolling: The ingot is then reheated and rolled into a thin round bar using a rolling mill. This process thins the metal and also helps to refine its grain structure, which improves its strength and ductility.
4. Drawing: The thin round bar is then pulled through a series of dies to reduce its diameter and form it into the gr3 titanium wire. This process is called drawing, and it typically involves several stages of drawing to achieve the desired diameter.
5. Annealing: Once the grade 3 titanium wire has been drawn to its final diameter, it is annealed to improve its ductility and remove any residual stresses in the metal. This is typically done by heating the titanium wire to a high temperature and then slowly cooling it.
6. Finishing: Finally, the titanium wire is cleaned and finished to remove any surface contaminants or imperfections. This can include processes such as polishing or picking treatment.
Hot Tags:
You Might Also Like
Send Inquiry
