Titanium Bar

gr7 titanium including 0.12~0.25% palladium, this titanium material is more resistant to crevice corrosion than commercial pure titanium.

OT4-1/Ti-2Al-1.5Mn Titanium alloy rods
size:dia.89mm
tensile strength:540Mpa
specific elongation at fracture:10%
reduction of area:26%

Grade 6/Ti-5Al-2.5Sn
Used for Gas turbine engine casings and rings, Aerospace structural parts, aircraft engine and airframe. Chemical processing equipment

Titanium Rod Ti3Al2.5V/Grade 9
ASTM B338 Fully Annealed
ASTM B338 CWSR
AMS 4943/4/5

Composition Ti-6.5Al-1Mo-1V-2Zr
Diameter:25mm,45mm,50mm,65mm.etc
Application:Mainly used for main structural parts such as main bearing parts of the rear fuselage, engine casings,...

UNS R56400 is a corrosion resistant titanium alloy, chemical and technical requirements are the same as GR5/TC4/Ti6Al4V.
size:dia.20.8/19.8mm
length: 3000mm
qty: 7 tons

Inconel 718 Bar has two forms, one is the state after solution treatment and the other is the state after precipitation hardening. When the temperature reaches 700 ℃, it will show good tensile...

Item:Ti-6al4v titanium bar
Size;dia.89*450mm
tolerance: 89(0/+1)mm, 450mm(0/+2)mm
tensile strength:970Mpa
yield strength:918Mpa

This ASTM B348 Standard Specification is for annealed Titanium and Titanium Alloy Bars and Billets, Grades from grade 1 to grade 34. Titanium is used in oil exploration, power plants and mining...

Titanium alloy bar: Ti6Al2Sn4Zr6Mo(Ti6242)
Size: dia.2.5mm above
State:Annealled
Quality: ISO9001;2015, SGS or BV

we company has our own forging and rolling shop, we can produce the titanium pure GR1 GR2 GR3 and alloy GR5 GR7 GR9 billet in our factory, price and quality can be the best one you like, diameter...

Item: titanium disc
Application: aerospace
Material: TA19
Ultrasonic test is AMS2631 Class A.